To set a workable work at height control measures, proper work at height risk assessment should be carried out. Evaluate control measures to determine if they are effective or need to be modified. Victoria now has Regulations to cover all work where a fall of more than 2 metres could occur. NONSPECIFIC HAZARDS AND CONTROL METHODS Confined spaces ... guidance associated with controlling health hazards in painting operations within the Army. Substituting. Here are series of action that should be taken to manage all the hazards associated with work at height. The worker is often positioned between the work … Involve workers in the evaluation of the controls. There are a variety of ways employers and workers can help manage the hazards associated with spray painting and coating. Painted ladders should not be used as the paint coating may conceal faults. Administrative controls are not generally favoured because they can be difficult to implement, maintain and are not a reliable way to reduce exposure. You should check that your chosen control measure does not introduce new hazards. Hierarchy of control measures. Wherever possible, eliminating the hazards by using different materials or a different process is the best way to control risk. Work on roofs, at Generally speaking, painting is one of the easiest do-it-yourself projects. Painting – interior and exterior – often involves potential fall hazards. Falls are a major cause of workplace deaths each year. These control measures have many limitations because the hazard itself is not actually removed or reduced. Work at height control measures. Chapters 3, 4 and 5 of this Code provide information on control measures for spray painting and powder coating activities. Think of a control measure as an action aimed to eliminate a hazard completely. But it is not without its potential hazards. A combination of these control measures may be required in order to adequately manage the risks with spray painting and powder coating. If the hazard you've identified can't be eliminated, follow the hierarchy of controls to select the next-best control to mitigate the risk of an accident, incident, injury, or near-miss in the laboratory.. risk control measures. This will guide the process of drawing out adequate control measures for work at height activity. You can do this by: Using water-based materials in place of toxic, solvent-based ones These Regulations aim to reduce the number of fall-related incidents. When painting, you’re typically working with toxic chemicals, old paint that may contain lead, power tools, and ladders—all of which increase the possibility of injury. If controls are not effective, identify, select, and implement further control measures that will provide adequate protection.